Skip to content
electricistaentrevegas.comReport a fault
Menu

Small electrical repairs at home and at your business

The odd jobs that keep piling up: the loose socket, the light still waiting to be hung, the oven to be connected or the doorbell that doesn't ring. We do them properly, with the right materials, and use the visit to sort several out at once.

Electrician replacing a socket during small electrical repairs at home

Installations and rewiring

Small electrical repairs: what it involves

Not everything electrical is a serious fault or a renovation. Often what's needed is replacing a broken socket, fitting a light, connecting the new hob or adding a socket where there is now a power strip. They are small jobs, but done badly they cause problems: loose terminals that heat up, lights that come down or appliances connected to a circuit that can't handle them.

With every repair we check the fitting and its connection, make sure the circuit and its protection are right for whatever is being connected and let you know if we see anything that needs attention, such as an unearthed socket in the bathroom or a badly made joint inside a box.

The most practical thing is to make a list of everything you have pending and send it to us through the form, with photos if you can. That way we bring the materials ready and sort everything out in the same visit, in Murcia city, its outlying districts and the other areas where we work.

Cases and jobs

Electrical repairs we carry out in homes and businesses

The ones we are asked for most, with an explanation, followed by the other jobs in this service.

Replacing a broken or loose socket

Sockets with a broken cover, loose in the box or that let the plug fall out. We isolate the circuit, check the cables aren't blackened or too short, strip them again if needed and fit a new socket firmly secured to the box, with the earth connected. If the socket supplies something powerful, such as the washing machine or a heater, we also check the cable size and the circuit breaker for that circuit.

Connecting the oven, induction hob or ceramic hob

When you switch from a ceramic hob to induction, or change the oven, the appliance has to be connected properly and the installation has to be able to take it. We check that the cooker and oven circuit has the right cable size and protection, connect it with the appropriate box or outlet, check the earthing and test the appliance at full power. If the hob needs more than the circuit can give, we explain it and adapt it.

Fitting a light, ceiling light or chandelier

New ceiling lights, ceiling fittings for bathrooms and kitchens or heavy lights in the dining room. We fix the bracket with an anchor suited to its weight and the type of ceiling, whether concrete, block-and-beam or plasterboard, connect live, neutral and earth with connector terminals and leave the ceiling rose closed, with no cables on show. If you are changing several lights, we fit them all in the same visit.

Ceiling fan with light

Ceiling fans for bedrooms and living rooms, almost essential in a Murcia summer. We check that the ceiling box can take the weight and vibration or fit a new bracket, mount and balance the fan and connect the light and motor separately or with a remote control. If you want to control the light and fan from the wall, we fit a double switch.

Doorbell and entry phone

Doorbells that don't ring, broken push buttons and entry phones that don't open the door or have a noisy line. We check the transformer or power supply, the push button, the wiring and the door release, replace whatever is faulty and, if the unit is old and there are no spare parts, fit a compatible one. In communities we also check the street panel.

More cases we deal with

  • Switch that doesn't work or sparks

    Switches with a worn mechanism or a loose terminal. We replace it and check the connection of the light it controls.

  • Adding a new socket

    Next to the bed, in the living room, on the terrace or behind the TV. We take it from the appropriate circuit, recessed or surface-mounted in trunking.

  • Sockets with USB charging

    We replace bedside, desk or kitchen sockets with models with built-in USB to get chargers out of the way.

  • Connecting the electric water heater

    When the water heater is replaced we check the outlet, the circuit and the earthing, and connect it to a suitable outlet or box, away from splashes.

  • Getting rid of power strips and extension leads

    Where there are daisy-chained power strips we fit recessed double or triple sockets and spread the appliances so no single socket is overloaded.

  • Light point that won't come on

    If the bulb is fine and the light still won't come on, we find the fault in the switch, the lamp holder, the ceiling connection or the cable, and repair it.

  • Small chases and trunking

    We cut and fill small chases to recess a new cable, or run it in trunking or moulding when you'd rather avoid building work.

  • Bathroom extractor fan or kitchen hood

    We connect extractor fans, with a timer or together with the bathroom light, and the hood socket at the right height.

  • Socket for a portable air conditioner, tumble dryer or freezer

    Powerful appliances that shouldn't go in just any socket: we check the circuit and, if needed, fit a socket on its own line.

  • Terrace or patio sockets and lights

    Weatherproof sockets with covers, wall lights and light points on terraces and patios, with outdoor boxes and fittings.

  • Sensor light in a hallway or wardrobe

    Lights that come on when you open the wardrobe or walk down the hallway at night, with a discreet, well-aimed sensor.

When a small repair needs something more

Many repairs come down to replacing the fitting. But there are signs that the problem lies behind the faceplate and the circuit should be checked:

In those cases we explain what we see and what we suggest, and you decide whether we sort it out on that visit or plan it for later.

  • Blackened or hardened cables, or cracked insulation inside the box.
  • A socket that gets hot with an appliance that used to work without any problem.
  • Several sockets in the same room failing at the same time.
  • Powerful appliances, such as an oven or a portable air conditioner, connected to the general sockets circuit.
  • Fittings with no earth in the kitchen, bathroom or terrace.

What you can do yourself and what to leave to us

Changing a bulb, trying an appliance in another socket or resetting a breaker once after it tripped when something specific was plugged in are things you can do yourself. If the breaker or the RCD trips again as soon as you reset it, leave it off and write to us: there is a fault to track down.

Opening fittings, junction boxes or the consumer unit is a job for an electrician, not only for safety but because a connection left loose ends up overheating. And if you notice any burning smell, sparks or heat at a socket, stop using it, switch off the breaker for that circuit and tell us through the form.

What you get

What you get when we do it

  • Several repairs, one visit

    We group everything pending into a single visit and bring the materials ready.

  • Firmly fixed and properly connected

    Fittings secure in their boxes, terminals tightened and the earth connected at every point.

  • Circuit checked

    Before connecting anything powerful we check that the circuit and its protection can take it.

  • The right materials

    Indoor or outdoor fittings, anchors to suit the ceiling and weatherproof boxes where there is damp.

How we work

How we fix it, step by step

  1. Send us your list

    Write to us through the form with everything you have pending and, if you can, a few photos.

  2. We prepare the materials

    With the list and photos we bring fittings, boxes, anchors and whatever each repair needs.

  3. We carry out the repairs

    We isolate the affected circuit, do each job and leave everything clean and tidy.

  4. We test and explain

    We test each point, check the circuit's protection and tell you what we have found.

Frequently asked questions

Questions about small electrical repairs

How much does a small electrical repair cost?

It depends on the number of jobs grouped into the visit, the materials (whether you supply the fittings or lights or we bring them), the difficulty, such as high ceilings, false ceilings or chases, and the area. That is why it pays to group several repairs together: the travel and preparation are shared across all of them.

Do you take on small jobs, like hanging a light?

Yes. Hanging a light, replacing a socket or connecting an oven are jobs we do with the same care as a full installation. If you tell us everything you have pending, we group it together and sort it out in the same visit.

Can I connect the induction hob to the oven's outlet?

It depends on the circuit. In kitchens, the oven and hob share the cooker circuit, 6 mm² and protected by a 25 A breaker, but a powerful induction hob plus the oven at the same time can exceed what it allows. We check the power of both appliances and the circuit, and if needed we put the hob on its own line.

Can USB sockets be fitted in any box?

In most, yes, because USB sockets fit in the standard recessed box. They need a little more depth, so in very tight boxes or ones with a lot of cables the box may need replacing.

Do you replace the entry phone in the home or only the community one?

Both. In your home we replace the indoor handset with one compatible with the building's system; in the community we repair or renew the street panel, the power supply and the door release. If the system is very old and compatible handsets are no longer available, we explain the options for renewing it.

What should I do if a socket gets hot or smells of burning?

Stop using it, unplug the appliance if you can do so without touching hot parts and switch off the breaker for that circuit at the consumer unit. Don't use it again until we have seen it: that heat almost always comes from a loose terminal or an overload, and it gets worse. Tell us through the form and we will replace it, checking the cable as well.

You may also be interested in

Related services

LED lighting

LED lighting for living rooms, kitchens, gardens, façades, pools, shops and communal areas, with sensors and switching designed for each use.

See the service

Rewiring

Old installations with no earthing or two-wire circuits, kitchen and bathroom refits, shops, new-build villas, air conditioning lines and swimming pools.

See the service

Where

Areas where we do it most

As well as Murcia and its districts, we handle it with home call-outs in these areas.

Shall we talk it through?

Tell us what you need and where it is: we will reply with what it takes to do it properly.